How to Build an Advanced Hybrid Steam Room

The history of steam baths goes way back when people used them for their extremely relaxing effects on the mind and body. As more and more associated health benefits of steam baths were discovered and revealed, steam bath therapy became more popular. Today, people purchase membership at spas, health centers or gyms where steam bathing facilities are available. In addition, some people also build their own steam baths and far infrared sauna at home in order to be able to use it with lots of convenience. An advanced hybrid steam room can be built for using the following procedure.

1. Collect all the equipment, materials and tools require for your own advanced hybrid steam room. These include pliers, sloped floor with drains, bolts, caulk, steam room panels, wrench and other basic tools. Make sure you have stainless steel nuts and bolts which are provided with the hybrid steam room kit.
2. Begin by bolting the steam room panels together. Follow the user’s manual in order to fix the panels in the right order. Fix the bolts tightly and make sure none of them is loose as it can lead to safety risks.
3. Before tightening the bolts in the panels, make sure that you have installed them all. 
4. After fixing the seat panels, move towards the ceiling panels. Following the same procedure, install all the bolts and tighten them up properly. In the case of the ceiling, you have to be more careful as it can be a greater safety risk if any loose bolts cause the ceiling to fall down and cause injury to you. For larger ceiling units, carry out the process of installation in sections so that you can handle them conveniently.
5. After fixing the ceiling in place, it is time to install the door. It is a piece of cake since the door is per-hung. All you have to do is screw the door frame in its right place by using per-drilled holes.
6. After the door is in place, you can anchor your hybrid steam room to the floor.
7. The last step in this procedure is caulking. Using the provided caulk, perform the procedure for proper adhesion of the room.

These simple steps will help you carry out the installation process quite easily. You should refer to the instruction manual in order to do the job perfectly and ensure your safety. Once you are done, you can enjoy your very own steam room.